What does NFPA 2001 cover?

Agent storage containers and their discharge piping and nozzles; Room integrity — the sealed envelope that holds concentration after discharge; Detection and the release sequence that triggers a discharge; The abort control and the pre-discharge warning that precede it; Nozzle placement for even agent distribution across the protected room.

What does a field inspection against NFPA 2001 look at?

Photograph the agent containers with their pressure and weight indicators legible, so charge can be read from the record. Nozzle locations documented against the room layout, since distribution follows the space the system was designed for. Room integrity noted as observed — door sweeps, dampers and penetrations sealed — with the fan-pressurization test left to the licensed contractor. Detection devices and the abort station captured in place, with the pre-discharge signal path documented. Any cable tray, floor tile or penetration opened after the integrity test flagged, because the seal is only as good as the last opening.

Which checklists verify work against NFPA 2001?

2 free checklists in the RTI library reference this family. Each is listed on this page with the photo evidence every item needs before it can be submitted.

National Fire Protection Association

NFPA 2001

NFPA 2001 covers clean agent fire-extinguishing systems — the kind that protect a server room or electrical room where water would do as much harm as the fire. It ties together the agent storage, the detection and release that discharge it, and the room integrity that has to hold the agent long enough to work. Testing, including the room integrity check, belongs to the licensed contractor.

Adoption varies by jurisdiction. Confirm the edition your authority having jurisdiction enforces before you run a walk against it.

What it covers

Agent storage containers and their discharge piping and nozzles
Room integrity — the sealed envelope that holds concentration after discharge
Detection and the release sequence that triggers a discharge
The abort control and the pre-discharge warning that precede it
Nozzle placement for even agent distribution across the protected room

What the evidence looks like

Photograph the agent containers with their pressure and weight indicators legible, so charge can be read from the record.
Nozzle locations documented against the room layout, since distribution follows the space the system was designed for.
Room integrity noted as observed — door sweeps, dampers and penetrations sealed — with the fan-pressurization test left to the licensed contractor.
Detection devices and the abort station captured in place, with the pre-discharge signal path documented.
Any cable tray, floor tile or penetration opened after the integrity test flagged, because the seal is only as good as the last opening.

Checklists that verify work against NFPA 2001

2 free checklists, each with the photo every item needs before it can be submitted.

Clean agent fire suppression QuarterlyClean agent fire suppression quarterly maintenance checklistAgent container pressure, panel status, room integrity and release access checked in the server room each quarter6 items8 photos Clean agent fire suppression AnnualClean agent fire suppression annual maintenance checklistLicensed contractor's annual service and room integrity test, observed and recorded, not certified by the site4 items5 photos

See the whole checklist library

Common questions

What is NFPA 2001?: Clean agent systems for server and electrical rooms: agent storage, room integrity, detection and abort. It is published by the National Fire Protection Association. NFPA 2001 covers clean agent fire-extinguishing systems — the kind that protect a server room or electrical room where water would do as much harm as the fire. It ties together the agent storage, the detection and release that discharge it, and the room integrity that has to hold the agent long enough to work. Testing, including the room integrity check, belongs to the licensed contractor.
What does NFPA 2001 cover?: Agent storage containers and their discharge piping and nozzles; Room integrity — the sealed envelope that holds concentration after discharge; Detection and the release sequence that triggers a discharge; The abort control and the pre-discharge warning that precede it; Nozzle placement for even agent distribution across the protected room.
What does a field inspection against NFPA 2001 look at?: Photograph the agent containers with their pressure and weight indicators legible, so charge can be read from the record. Nozzle locations documented against the room layout, since distribution follows the space the system was designed for. Room integrity noted as observed — door sweeps, dampers and penetrations sealed — with the fan-pressurization test left to the licensed contractor. Detection devices and the abort station captured in place, with the pre-discharge signal path documented. Any cable tray, floor tile or penetration opened after the integrity test flagged, because the seal is only as good as the last opening.
Which edition of NFPA 2001 applies to my project?: Adoption varies by jurisdiction. Confirm the edition your authority having jurisdiction enforces before you run a walk against it.
Which checklists verify work against NFPA 2001?: 2 free checklists in the RTI library reference this family. Each is listed on this page with the photo evidence every item needs before it can be submitted.

A standard is only met if the evidence exists

RTI holds the submit button until every mandatory item is answered and the photos are attached, then chains the record so it can be proven untouched later.

Start free Download field one-pager (PDF)