For residential builders
The same walk, on every unit, without the binder.
Repetition is the whole job. One checklist per unit type, one sticker per door, and a tag list that shows which units are through rough-in and which are still open, lot by lot and phase by phase.
What gets in the way, and what RTI does about it
Today
Ninety units means ninety versions of the same walk, and the only record that they all happened the same way is your superintendent's memory.
With RTI
Build the checklist once and bind it to every unit tag. Each scan opens the unit's tag, one tap from the identical list with the identical photo requirement, so unit 12 and unit 88 are documented the same way.
Today
Pre-drywall gets covered before somebody photographs what is behind it, and then a warranty claim arrives.
With RTI
The photo requirement is enforced before the item can be submitted, so the shot behind the wall gets taken while the wall is still open.
Today
Buyer and lender walkthroughs turn into a scramble for paperwork that lives in four places.
With RTI
Export any of the unit's inspections as a branded PDF with its answers, photos, signatures and sign-offs, or its approved inspections as one package, whenever you want and with no lock-in.
What this looks like on your job
One tag, one checklist, and the photos that have to come with it.
Tag
Unit 305, Kitchen Rough-In
RIV-A-F3-305
- Sticker location
- Inside of unit entry door
- Assigned checklist
- Kitchen rough-in, pre-drywall
- Supply and waste lines pressure tested2 photos required
- Range and dishwasher circuits pulled1 photo required
- Blocking installed for upper cabinets2 photos required
- No penetrations left unsealed1 photo required
Start from a checklist that already knows the walk
Real guides from the RTI library. Sections in build order, what to look for on each item, and the photos that prove it. Free to read, one click to run on a tag.
- Pre-drywallPre-drywall inspection checklistOne walk covering structure, MEP rough-in, insulation and blocking.11 items20 photos
- FramingFraming inspection checklistPre-drywall walk: bearing, connectors, notching, blocking.13 items27 photos
- WindowsWindow installation inspection checklistRough opening, sill pan, flashing sequence, operation.12 items18 photos
Questions residential builders ask
3 answers
- How does RTI handle ninety versions of the same unit walk?
- You build the checklist once per unit type and bind it to every unit tag. Each scan opens the unit's tag, one tap from the identical list with the identical photo requirement, so unit 12 and unit 88 are documented the same way, and the tag list shows which units are through and which are still open.
- What stops pre-drywall work getting covered without photos?
- The photo gate. A submission can't leave the phone until the required photos are attached, so the shot behind the wall gets taken while the wall is still open, not chased after the drywall crew has been through.
- Can I hand a buyer or lender a record for one unit?
- Yes. Export any inspection as a branded PDF with its answers, photos, signatures and client sign-off, or search the unit's tag on the board and download its approved inspections as one package. There's no lock-in: exports keep working while you're subscribed and after you cancel.
Put it on a real job.
Tag one area, run one walk, and see the record it leaves behind.
30-day trial · No card required