Skip to content
RTI

Checklists by Category

Fall protection anchor maintenance checklists

Fall protection anchor maintenance checklists for the quarterly and annual rounds: 2 free lists, 27 items and 13 photo requirements, each item naming what to look for and the photo evidence it needs.

Start freeAll checklists

The fall protection anchor rounds

Fall protection anchor QuarterlyFall protection anchor quarterly maintenance checklistAnchor points, davit bases, lifeline cable and hardware, and the current certification tag observed before use each quarter14 items7 photosFall protection anchor AnnualFall protection anchor annual maintenance checklistRecertification by the qualified person or PE observed and recorded; the field documents anchor condition and the load-capacity confirmation, it never certifies13 items6 photos

Where each walk sits in the schedule

  1. 01quarterly

    Fall protection anchor quarterly maintenance checklist

    Every quarter, and by the user before every use, since an anchor sits exposed on the roof between uses and corrosion, a loosened base or an expired certification all hide until the day someone hangs their life on it.

    Run by: The competent person or facilities lead walking the roof anchors and lifeline runs, checking condition and confirming the system's certification is current before anyone ties off.

  2. 02annual

    Fall protection anchor annual maintenance checklist

    On the system's required recertification cycle, the pass where a qualified person confirms the anchors and lifelines can still take the load, which no condition walk on the building side can establish.

    Run by: A qualified person or professional engineer inspects and recertifies the load capacity of each anchor and lifeline; the building team observe, document the condition and file the certification, and never certify the system themselves.

What most often fails on a fall protection anchor

  • Anchor base or its roof penetration corroded or weeping, so the structural connection the fall arrest depends on is quietly losing strength.
  • Horizontal lifeline cable slack, kinked or frayed, or an energy absorber already deployed from a prior fall and never reset.
  • Certification tag missing or lapsed, so there is no current record that a qualified person has confirmed the system's load capacity.
  • Recertification lapses because nobody tracks the due date, so crews keep tying off to a system no longer confirmed for the load.
  • A qualified person's deficiency finding filed but never dated or tracked on the building side, so a flagged anchor slips back into use.
  • Anchors that carried a prior fall left in service without the qualified person specifically clearing them for reuse.

Common questions

4 answers

Which fall protection anchor maintenance rounds do these checklists cover?
Fall protection anchor quarterly maintenance checklist (quarterly): Every quarter, and by the user before every use, since an anchor sits exposed on the roof between uses and corrosion, a loosened base or an expired certification all hide until the day someone hangs their life on it. Fall protection anchor annual maintenance checklist (annual): On the system's required recertification cycle, the pass where a qualified person confirms the anchors and lifelines can still take the load, which no condition walk on the building side can establish.
Who runs the fall protection anchor maintenance round?
The competent person or facilities lead walking the roof anchors and lifeline runs, checking condition and confirming the system's certification is current before anyone ties off. A qualified person or professional engineer inspects and recertifies the load capacity of each anchor and lifeline; the building team observe, document the condition and file the certification, and never certify the system themselves.
What most often fails on a fall protection anchor?
Anchor base or its roof penetration corroded or weeping, so the structural connection the fall arrest depends on is quietly losing strength. Horizontal lifeline cable slack, kinked or frayed, or an energy absorber already deployed from a prior fall and never reset. Certification tag missing or lapsed, so there is no current record that a qualified person has confirmed the system's load capacity. Recertification lapses because nobody tracks the due date, so crews keep tying off to a system no longer confirmed for the load.
Can I run these checklists in RTI?
Yes. Start a free RTI workspace and load any of the 2 lists (27 items in total). The Photo Gate holds the submit button until every mandatory item is answered and its photos are attached, and approved inspections roll into a branded turnover package with a tamper evident audit trail.

Run these lists with the Photo Gate.

Tag one area, scan it, and the submit stays locked until the photos exist.

Start freeTry the live demo

30-day trial · No card required