Checklists by equipment
2 lists · 11 items · 15 photosSewage ejector pump maintenance checklists
Sewage ejector pump maintenance checklists for the quarterly and annual rounds: 2 free lists, 11 items and 15 photo requirements, each item naming what to look for and the photo that proves it. Work is commonly verified against IPC / UPC plumbing codes; the edition in force is the AHJ's call on each project.
The sewage ejector pump rounds
Sewage ejector pump QuarterlySewage ejector pump quarterly maintenance checklistSealed cover, vent and float tree checked without a full basin opening on the quarterly round6 items8 photosSewage ejector pump AnnualSewage ejector pump annual maintenance checklistBasin opened and cleaned, pump pulled and duplex alternation proven on the annual service5 items7 photos
Where each walk sits in the schedule
- Sewage ejector pump quarterly maintenance checklistquarterly
- Every quarter, kept as a light-touch check so the sealed basin is only fully opened at the annual when the space can be ventilated and cleared. Run by: The plumbing or maintenance tech on the quarterly round, gassing the pit before working near it.
- Sewage ejector pump annual maintenance checklistannual
- Once a year, the one visit where the sealed basin is fully opened, so scheduled when the area can be aired out and traffic kept clear. Run by: The plumbing service tech on the annual service, with the space ventilated and the basin gassed before opening.
What most often fails on a sewage ejector pump
- Ejector runs but solids don't clear because a wipe or rag has bridged the discharge and it's grinding the same charge over and over.
- Cover gasket left loose or a bolt missing after the last service, so sewer gas seeps into the room and the float tree isn't sealed.
- Vent line assumed open when it's actually blocked, so the basin can't breathe and the pump labors against a vacuum on every cycle.
- Basin opened without ventilating first, exposing the tech to sewer gas in a confined pit.
- On a duplex pit the lag ejector has sat idle for a year and is seized, only found when the lead pump can't keep up.
Verified against
Families only, never clause numbers. Adoption varies by jurisdiction; confirm the edition your authority having jurisdiction enforces before you run a walk against it.
Common questions
- Which sewage ejector pump maintenance rounds do these checklists cover?
- Sewage ejector pump quarterly maintenance checklist (quarterly): Every quarter, kept as a light-touch check so the sealed basin is only fully opened at the annual when the space can be ventilated and cleared. Sewage ejector pump annual maintenance checklist (annual): Once a year, the one visit where the sealed basin is fully opened, so scheduled when the area can be aired out and traffic kept clear.
- Who runs the sewage ejector pump maintenance round?
- The plumbing or maintenance tech on the quarterly round, gassing the pit before working near it. The plumbing service tech on the annual service, with the space ventilated and the basin gassed before opening.
- What most often fails on a sewage ejector pump?
- Ejector runs but solids don't clear because a wipe or rag has bridged the discharge and it's grinding the same charge over and over. Cover gasket left loose or a bolt missing after the last service, so sewer gas seeps into the room and the float tree isn't sealed. Vent line assumed open when it's actually blocked, so the basin can't breathe and the pump labors against a vacuum on every cycle. Basin opened without ventilating first, exposing the tech to sewer gas in a confined pit.
- Which standards is sewage ejector pump work verified against?
- IPC / UPC plumbing codes, published by the International Code Council / IAPMO. Adoption varies by jurisdiction. Confirm the edition your authority having jurisdiction enforces before you run a walk against it.
- Can I run these checklists in RTI?
- Yes. Start a free RTI workspace and load any of the 2 lists (11 items in total). The Photo Gate holds the submit button until every mandatory item is answered and its photos are attached, and approved inspections roll into a branded turnover package with a tamper-evident audit trail.