Checklists by equipment
2 lists · 10 items · 13 photosStandpipe system maintenance checklists
Standpipe system maintenance checklists for the quarterly and annual rounds: 2 free lists, 10 items and 13 photo requirements, each item naming what to look for and the photo that proves it. Work is commonly verified against NFPA 25 and NFPA 14; the edition in force is the AHJ's call on each project.
The standpipe system rounds
Standpipe system QuarterlyStandpipe system quarterly maintenance checklistHose valves, caps, FDC and control-valve position checked at the risers and cabinets each quarter6 items8 photosStandpipe system AnnualStandpipe system annual maintenance checklistPeriodic flow test witnessed with the AHJ, observed and recorded, with the deeper valve and gauge checks4 items5 photos
Where each walk sits in the schedule
- Standpipe system quarterly maintenance checklistquarterly
- Every quarter, and after any tenant or fit-out work near a riser, since a capped-off or leaking hose valve and a closed control valve both hide until they're needed. Run by: The building or facilities person walking the stair risers and floor cabinets each quarter, tagging each hose valve and the FDC.
- Standpipe system annual maintenance checklistannual
- On the system's periodic cycle, the pass that flows the standpipe to prove it delivers pressure and volume, which no quarterly visual round can confirm. Run by: A licensed contractor runs the periodic flow test, witnessed with the AHJ; the building team walk it, observe and record the results.
What most often fails on a standpipe system
- Hose valve cap gone and the outlet threads dinged, so a hose won't couple cleanly when the fire department arrives.
- Riser control valve found throttled or closed after fit-out work and left that way, with the tamper switch never checked.
- FDC caps missing and the intake full of trash, discovered by the responding crew instead of on a round.
- Flow test scheduled but the AHJ witness never lined up, so the result carries no weight and gets questioned later.
- Gauges left in place uncalibrated for years, so the pressures written down at the test can't be trusted.
Common questions
- Which standpipe system maintenance rounds do these checklists cover?
- Standpipe system quarterly maintenance checklist (quarterly): Every quarter, and after any tenant or fit-out work near a riser, since a capped-off or leaking hose valve and a closed control valve both hide until they're needed. Standpipe system annual maintenance checklist (annual): On the system's periodic cycle, the pass that flows the standpipe to prove it delivers pressure and volume, which no quarterly visual round can confirm.
- Who runs the standpipe system maintenance round?
- The building or facilities person walking the stair risers and floor cabinets each quarter, tagging each hose valve and the FDC. A licensed contractor runs the periodic flow test, witnessed with the AHJ; the building team walk it, observe and record the results.
- What most often fails on a standpipe system?
- Hose valve cap gone and the outlet threads dinged, so a hose won't couple cleanly when the fire department arrives. Riser control valve found throttled or closed after fit-out work and left that way, with the tamper switch never checked. FDC caps missing and the intake full of trash, discovered by the responding crew instead of on a round. Flow test scheduled but the AHJ witness never lined up, so the result carries no weight and gets questioned later.
- Which standards is standpipe system work verified against?
- NFPA 25, published by the National Fire Protection Association; NFPA 14, published by the National Fire Protection Association. Adoption varies by jurisdiction. Confirm the edition your authority having jurisdiction enforces before you run a walk against it.
- Can I run these checklists in RTI?
- Yes. Start a free RTI workspace and load any of the 2 lists (10 items in total). The Photo Gate holds the submit button until every mandatory item is answered and its photos are attached, and approved inspections roll into a branded turnover package with a tamper-evident audit trail.