Checklists by trade
3 lists · 14 items · 24 photosOrnamental metals and railings inspection checklists
Ornamental metals and railings inspection checklists for the rough-in, final and punch walks: 3 free lists, 14 items and 24 photo requirements, each item naming what to look for and the photo that proves it. Work is commonly verified against AWS D1.1; the edition in force is the AHJ's call on each project.
The ornamental metals and railings walks, in build order
Ornamental metals and railings Rough-in· Ornamental metals and railingsOrnamental metals and railings rough-in inspection checklistEmbeds, base plates, blocking and anchorage verified against the load before finishes close the connection4 items7 photosOrnamental metals and railings Final· Ornamental metals and railingsOrnamental metals and railings final inspection checklistInstalled rails checked plumb, aligned and load-anchored, with infill and handrail geometry verified6 items11 photosOrnamental metals and railings Punch· Ornamental metals and railingsOrnamental metals and railings punch checklistCloseout walk for loose posts, weld and finish touch-up and glass infill damage4 items6 photos
Where each walk sits in the schedule
- Ornamental metals and railings rough-in inspection checklistrough-in
- After embeds and blocking are set and before the finish covers them, while a missing embed or a wrong anchor can still be added or corrected. Run by: The railing installer's lead checking the connections, or the GC's superintendent releasing embeds before concrete, tile or drywall covers them.
- Ornamental metals and railings final inspection checklistfinal
- After rails are set and grouted and welds and finish are complete, before the owner's punch walk. Run by: The GC's superintendent with the railing installer, walking finished stairs and edges before turnover.
- Ornamental metals and railings punch checklistpunch
- During closeout, after other trades have worked around the rails and final cleaning reveals scratches and chipped glass. Run by: The railing installer on a callback, or the GC's superintendent closing rail punch items.
What most often sends ornamental metals and railings work back
- Post base anchored to a slab edge with less concrete than the anchor needs, so it pulls a cone of concrete the first time someone leans on the rail.
- Wood blocking for a wall-mounted handrail left out of the framing, discovered only when the bracket hits hollow drywall at install.
- Core-drilled post pockets grouted with the wrong material or before the surrounding concrete has strength, and the pour is already finished over them.
- Guard infill spacing opened up on a raked stair run so the sphere passes between balusters, even though the level runs check out.
- Handrail returned short of the top and bottom risers, leaving no graspable extension where people actually reach for it.
- Field welds ground and painted over before anyone confirmed full penetration, hiding a cold or partial weld under the finish.
- A post reported loose gets a dab of caulk at the base instead of the grout or fastener fix the connection actually needs.
- Glass infill panel chipped at an edge by another trade and left in place, where the chip is a crack waiting to run.
Verified against
Families only, never clause numbers. Adoption varies by jurisdiction; confirm the edition your authority having jurisdiction enforces before you run a walk against it.
Common questions
- Which ornamental metals and railings inspections do these checklists cover?
- Ornamental metals and railings rough-in inspection checklist (rough-in): After embeds and blocking are set and before the finish covers them, while a missing embed or a wrong anchor can still be added or corrected. Ornamental metals and railings final inspection checklist (final): After rails are set and grouted and welds and finish are complete, before the owner's punch walk. Ornamental metals and railings punch checklist (punch): During closeout, after other trades have worked around the rails and final cleaning reveals scratches and chipped glass.
- Who runs an ornamental metals and railings inspection?
- The railing installer's lead checking the connections, or the GC's superintendent releasing embeds before concrete, tile or drywall covers them. The GC's superintendent with the railing installer, walking finished stairs and edges before turnover. The railing installer on a callback, or the GC's superintendent closing rail punch items.
- What most often sends ornamental metals and railings work back?
- Post base anchored to a slab edge with less concrete than the anchor needs, so it pulls a cone of concrete the first time someone leans on the rail. Wood blocking for a wall-mounted handrail left out of the framing, discovered only when the bracket hits hollow drywall at install. Core-drilled post pockets grouted with the wrong material or before the surrounding concrete has strength, and the pour is already finished over them. Guard infill spacing opened up on a raked stair run so the sphere passes between balusters, even though the level runs check out.
- Which standards is ornamental metals and railings work verified against?
- AWS D1.1, published by the American Welding Society. Adoption varies by jurisdiction. Confirm the edition your authority having jurisdiction enforces before you run a walk against it.
- Can I run these checklists in RTI?
- Yes. Start a free RTI workspace and load any of the 3 lists (14 items in total). The Photo Gate holds the submit button until every mandatory item is answered and its photos are attached, and approved inspections roll into a branded turnover package with a tamper-evident audit trail.