Checklist library
Construction inspection checklists you can run tomorrow
Every list below is written the way a walk actually happens: sections in build order, an item that says what you are looking for, and the number of photos that would prove it. Use them on paper, or load one into RTI and let the Photo Gate hold the submit button until the evidence exists.
54 of 101 checklists · General
Punch listPunch list templateRoom-by-room closeout items with the before-and-after that closes them.15 items21 photosFramingFraming inspection checklistPre-drywall walk: bearing, connectors, notching, blocking.13 items27 photosSite walkSite inspection checklistDaily walk: access, housekeeping, protection, environmental controls.12 items18 photosDrywallDrywall inspection checklistPre-cover sign-off, hang, rated assemblies and finish level.12 items23 photosPre-pourPre-pour concrete checklistSubgrade, formwork, rebar, embeds and cover before the truck arrives.13 items23 photosFinal inspectionFinal inspection checklist for constructionThe handover walk: systems, life safety, finishes and documentation.15 items25 photosITPInspection and test plan (ITP)Activities, acceptance criteria, hold points and the record per row.11 items8 photosPre-drywallPre-drywall inspection checklistOne walk covering structure, MEP rough-in, insulation and blocking.11 items20 photosWindowsWindow installation inspection checklistRough opening, sill pan, flashing sequence, operation.12 items18 photosFoundationFoundation inspection checklistExcavation, footings, anchorage, damp-proofing and backfill.12 items28 photosExcavationExcavation and trench inspection checklistLocates, protective systems, access, spoil and daily re-inspection.12 items23 photosSafety walkConstruction safety inspection checklistFall protection, access, electrical, equipment and PPE.12 items25 photosSidingSiding and cladding inspection checklistWeather barrier, flashing, drainage plane, clearances.12 items25 photosMasonryMasonry inspection checklistMortar, reinforcement, grout, flashing and weeps.12 items25 photosPaintingPainting inspection checklistPreparation, conditions, priming, coverage and final acceptance.12 items21 photosFlooringFlooring installation inspection checklistSubstrate flatness, moisture testing, layout and protection.12 items25 photosStructural steelStructural steel inspection checklistAnchorage, erection tolerance, bolting, welding and coatings.12 items27 photosFraming Rough-in· FramingFraming rough-in inspection checklistStud layout, plumb, headers and connectors verified during the erection walk8 items13 photosFraming Pre-cover· FramingFraming pre-cover inspection checklistThe hold-point walk before sheathing and drywall bury blocking, bracing and connectors6 items11 photosFraming Final· FramingFraming final inspection checklistFinish-adjacent framing checked for flatness and backing before trim and cabinetry6 items9 photosConcrete Rough-in· ConcreteConcrete rough-in inspection checklistFormwork, reinforcement and embeds verified on the deck the morning of the pour9 items17 photosConcrete Pre-pour· ConcreteConcrete pre-pour inspection checklistThe hold-point walk before the pour buries reinforcement, embeds and vapor barrier7 items15 photosConcrete Final· ConcreteConcrete final inspection checklistStripped concrete walked for surface defects, curing and joint work before turnover8 items15 photosMasonry Rough-in· MasonryMasonry rough-in inspection checklistFirst-lift walk of layout, coursing, mortar joints and reinforcement before the wall builds height9 items14 photos