What does this metal wall panels punch checklist cover?

10 items across 3 sections, covering finish and closures, after the first storms, sealant and signoff. Each item spells out what the person walking the job is actually looking for, not just a box to tick.

Who should run this inspection?

The panel foreman on a callback, or the GC's superintendent closing envelope punch items.

When in the schedule should this walk happen?

During closeout, after final cleaning reveals scratches and after the first storms and thermal cycles reveal loose closures and sealant misses.

Why do these items ask for a photo?

8 of the 10 items call for photo evidence, 9 photos in all. A checklist answer without the photo is a claim; the photo is what makes the record worth something in a dispute and lets a reviewer approve work without re-walking the job.

What most often fails a metal wall panels punch inspection?

Finish scratched by another trade after cleaning and touched up with a pen that reads a different color once it weathers. A sealant miss at a hidden closure found only after water shows up inside, when the lift is already gone.

Can I use this checklist in RTI?

Yes. Start a free RTI workspace, build this list as a checklist, and the Photo Gate holds the submit button until every mandatory item is answered and its photos are attached. Approved inspections roll into a branded turnover package with a tamper evident audit trail.

Free checklist

Metal wall panels

Metal wall panels punch checklist

Metal wall panels punch is where small misses become callbacks after the crew has demobilized. This checklist walks the finished work the way the owner and the next trade will see it, with the photo that closes each item instead of a note that reopens it. Work is commonly verified against manufacturer's published instructions, the applicable building code. Confirm the edition your authority having jurisdiction has adopted.

Start free with this checklist Download as PDF

The checklist

Every item, and the photo evidence it needs

The photo count on each row is what RTI would require before the item can be submitted. Work the list here and watch the gate hold, or load it into RTI and let it enforce the real thing.

Finish and closures

Scratched or marred finish located and addressed
A close shot of each damaged area plus a wide shot locating it on the elevation, touch-up matched to the coating or the panel replaced.
Loose closures and trim re-secured
Closures, copings and trim checked for movement, refastened and re-lapped so nothing rattles or lets water behind the panels.
Each elevation checked for dents, creased ribs and bent edges
Elevation looked along from the ground or lift for damage from lifts or deliveries; damaged panels marked by location for replacement, kept separate from finish-only scratches.
Replacement panels match the original color and profile
Any replaced panel checked against its neighbors for color lot, gloss and profile before the lift leaves the elevation.
No photo

After the first storms

Exposed and trim fasteners checked after thermal cycling
Fasteners at trim, closures and any exposed-fastener runs checked by eye and hand; backed-out screws replaced and sealing washers seated, not just driven tighter.
Panel faces below trim and cut edges checked for rust staining
Faces below trim, fasteners and cut edges looked over after the first rains; any streak followed back to filings, a wrong fastener or an untreated edge and fixed at the source.
Inside face checked for water at the base and openings
Interior side of the wall walked after rain; staining, wet insulation or drips at the base, openings and penetrations photographed and traced.

Sealant and signoff

Sealant misses at joints and penetrations corrected
Joints and penetrations rechecked for gaps, skips and voids, corrections tooled and backed, weeps left clear.
No remaining panel items before elevation signoff
All punch items per elevation or zone closed with photos before the area is released to turnover.
Owner and architect panel items merged into this list
Panel items from the owner's and architect's walks added here by elevation, so every open item is tracked in one place for the turnover record.
No photo

What usually sends this back

The failures are almost always the evidence, not the work

Finish scratched by another trade after cleaning and touched up with a pen that reads a different color once it weathers.
A sealant miss at a hidden closure found only after water shows up inside, when the lift is already gone.

Common questions

6 answers

What does this metal wall panels punch checklist cover?: 10 items across 3 sections, covering finish and closures, after the first storms, sealant and signoff. Each item spells out what the person walking the job is actually looking for, not just a box to tick.
Who should run this inspection?: The panel foreman on a callback, or the GC's superintendent closing envelope punch items.
When in the schedule should this walk happen?: During closeout, after final cleaning reveals scratches and after the first storms and thermal cycles reveal loose closures and sealant misses.
Why do these items ask for a photo?: 8 of the 10 items call for photo evidence, 9 photos in all. A checklist answer without the photo is a claim; the photo is what makes the record worth something in a dispute and lets a reviewer approve work without re-walking the job.
What most often fails a metal wall panels punch inspection?: Finish scratched by another trade after cleaning and touched up with a pen that reads a different color once it weathers. A sealant miss at a hidden closure found only after water shows up inside, when the lift is already gone.
Can I use this checklist in RTI?: Yes. Start a free RTI workspace, build this list as a checklist, and the Photo Gate holds the submit button until every mandatory item is answered and its photos are attached. Approved inspections roll into a branded turnover package with a tamper evident audit trail.

Related checklists

Metal wall panels Rough-inMetal wall panels rough-in inspection checklistSubstrate, water-resistive barrier, flashing and clip layout verified before panels cover the wall15 items16 photos Metal wall panels FinalMetal wall panels final inspection checklistInstalled panels checked for alignment, fastener pattern, sealant at joints and trim, with an oil-canning note14 items13 photos

Run it with the Photo Gate

A checklist nobody can submit half-finished

Load this list into RTI, stick a QR tag on the area it covers, and the submit button stays locked until every mandatory item is answered and the 9 required photos exist. Approved walks roll into a branded turnover package with a tamper evident record behind every line.