My crew already does the work right. Why do submissions still get kicked back?

Usually not for the work, but for the paperwork: a missing photo, an item nobody marked. RTI closes that gap by capturing proof as the crew works. The phone won't send a submission until the mandatory items and required photos are there, so what leaves the site is complete the first time.

Won't stopping to document slow my crew down?

The capture happens on the item they just finished, on a phone that's already in a pocket. That is faster than the alternative: coming back tomorrow to re-shoot a bay because the submission bounced, after the next trade has already moved into the area.

How does the crew know which checklist goes with which location?

They scan the QR sticker on the thing itself, the panel, the stud bay, the riser, and it opens the exact checklist bound to that tag. No hunting for the right form, no documenting the wrong grid line, no guessing which unit the photos belong to.

For foremen

Prove it was right the first time.

You run the crew and you know the work is good. What costs you is the kickback: a submission bounced for a missing photo, and now you're pulling people off tomorrow's task to re-shoot yesterday's. RTI captures the proof as the crew works, so what you send in doesn't come back.

Start free Browse the checklist library

The RTI home screen showing setup progress, review queue counts, and first pass yield for the week

The same home screen on a phone, with the review queue and setup steps stacked for use with one hand

The RTI inspections board with submitted, in review, approved, and rejected lanes of cards tagged by unit

The inspections list on a phone, showing status tabs and cards tagged by unit with the scan button in the bottom bar

RTI checklist templates tagged by trade, showing item counts and photo gate minimums

Checklist templates on a phone, with your templates and the RTI library filtered by category

RTI reports and analytics showing total inspections, first pass approval rate, and review turnaround

Reports on a phone, with period filters and headline quality metrics stacked in one column

The RTI activity log where every action is cryptographically chained, with absolute UTC timestamps

The activity log on a phone, with the verify chain, filters, and chained events in one column

A real inspection point

What this looks like on your job

One tag, one checklist, and the photos that have to come with it.

Tag

Grid C4, Framing Rough-In

FRM-B-L2-C4

Sticker location: Stud bay at grid line C4, Level 2
Bound checklist: Wall framing rough-in, pre-cover

Studs plumb, spacing and blocking to layout2 photos required
Headers and king studs sized and fastened to spec2 photos required
Fire blocking installed at required stops1 photo required
Penetrations located clear of structural members1 photo required

Checklists for your work

Start from a checklist that already knows the walk

Real guides from the RTI library. Sections in build order, what to look for on each item, and the photos that prove it. Free to read, one click to run on a tag.

Browse the full library

What gets in the way, and what RTI does about it

Today

A submission comes back rejected for a missing photo, not bad work, and now you're pulling two guys off today's task to re-shoot a bay the next trade has already covered.

With RTI

The phone won't submit until the required photos and mandatory answers are attached. The gap gets caught while the crew is standing at the bay, so the submission leaves complete and doesn't bounce.

Today

You send the crew to document a level and half of it comes back tagged to the wrong grid line or the wrong unit.

With RTI

The crew scans the sticker on the actual member and gets the exact checklist bound to that tag. The location is fixed by the scan, so the proof lands where it belongs the first time.

Today

When the GC questions whether your crew really did the rough-in before it was closed, you're arguing from memory.

With RTI

Each photo is stored against its checklist item with the tag, the timestamp and the crew member who shot it. The record shows the work went in right, before it was covered, with a name on it.

Questions foremen ask

My crew already does the work right. Why do submissions still get kicked back?: Usually not for the work, but for the paperwork: a missing photo, an item nobody marked. RTI closes that gap by capturing proof as the crew works. The phone won't send a submission until the mandatory items and required photos are there, so what leaves the site is complete the first time.
Won't stopping to document slow my crew down?: The capture happens on the item they just finished, on a phone that's already in a pocket. That is faster than the alternative: coming back tomorrow to re-shoot a bay because the submission bounced, after the next trade has already moved into the area.
How does the crew know which checklist goes with which location?: They scan the QR sticker on the thing itself, the panel, the stud bay, the riser, and it opens the exact checklist bound to that tag. No hunting for the right form, no documenting the wrong grid line, no guessing which unit the photos belong to.

Put it on a real job.

Tag one area, run one walk, and see the record it leaves behind. Start free. 30 days, no card required.

Start free See how it works